1. Daily cleaning
After each use, the sandblasting barrel parts should be cleaned immediately. Use clean water or special cleaning agent to rinse off the dust, sand and residue on the surface of the parts. For stains that are difficult to remove, you can use a soft cloth or brush to wipe gently, but avoid using metal brushes or hard objects to avoid scratching the surface of the parts.
2. Comprehensive cleaning
Regularly clean the sandblasting barrel parts thoroughly, including disassembling various parts such as nozzles, connecting pipes, sand tanks, etc., and cleaning them carefully. When cleaning, you should use special cleaning agents or clean water, and avoid using highly corrosive cleaning agents such as acids and alkalis to avoid damaging the surface of the parts.
3. Rust prevention treatment
The inside of the sandblasting barrel parts is susceptible to moisture, so rust prevention treatment should be carried out regularly. You can use a special rust inhibitor or apply a thin layer of rust prevention oil to keep the inside of the parts dry and rust-proof.
4. Lubrication and maintenance
Regularly add lubricating oil to the key parts of the sandblasting barrel to reduce wear and friction and ensure the normal operation of the equipment. Check the oil level and quality of the lubricating oil. If the quality is unqualified, it should be replaced in time.
5. Check and replace accessories
Regularly check the key parts of the sandblasting bucket, such as nozzles, storage hoppers, etc. If they are found to be worn or damaged, they should be replaced in time. When replacing parts, follow the instructions to ensure safety.
6. Check the compressed air system
The sandblasting bucket needs to be driven by compressed air, so the normal operation of the compressed air system should be checked regularly to ensure that it can provide stable pressure.
7. Overall safety inspection
Regularly check the overall safety of the sandblasting bucket, including the electrical system, fasteners, etc., to ensure that it is in good working condition.
